A95陶瓷材料的动态压缩测试研究

为了得到陶瓷材料有效的实验结果,必须采用多种改进措施(PulseShaper、高强度和高刚度垫块、直接测试试样应变以及使用较大长径比的试样)来满足SHPB装置所要求的基本假设条件。研究以A95陶瓷的测试为例,通过数值模拟分析证明:针对陶瓷材料改进的SHPB装置,可以得到陶瓷材料的有效压缩应力 应变曲线和压缩破坏强度。但是在分析材料的压缩破坏强度时,必须排除劈开破坏的干扰。数值模拟研究发现,压缩测试中出现的劈开破坏是由卸载过程中出现的局部横向(沿直径)拉伸造成的拉伸破坏。在修正了弥散对压缩破坏强度的影响后,研究得到了A95陶瓷的压缩破坏强度为3.5GPa。A95陶瓷的高应变率压缩应力 应变曲线显示了良好的线弹性,并且曲线的斜率与杨氏模量相同。     

拉压异性材料含受压圆孔大平板的极限分析

探讨了广义双剪应力强度理论在平面应力状态下的屈服轨迹及其方程式,并用于拉压异性材料圆孔受内压的极限分析,得到了与拉压比有关的弹性极限内压力,弹塑性区的应力、塑性内压力与弹塑性分界半径之间的关系、塑性区的最大半径和最大内压力,所得极值均高于用莫尔强度理论分析的结果。     

High dynamic range compression and detail enhancement of infrared images in the gradient domain

To find the trade-off between providing an accurate perception of the global scene and improving the visibility of details without excessively distorting radiometric infrared information, a novel gradient-domain-based visualization method for high dynamic range infrared images is proposed in this study. The proposed method adopts an energy function which includes a data constraint term and a gradient constraint term. In the data constraint term, the classical histogram projection method is used to perform the initial dynamic range compression to obtain the desired pixel values and preserve the global contrast. In the gradient constraint term, the moment matching method is adopted to obtain the normalized image; then a gradient gain factor function is designed to adjust the magnitudes of the normalized image gradients and obtain the desired gradient field. Lastly, the low dynamic range image is solved from the proposed energy function. The final image is obtained by linearly mapping the low dynamic range image to the 8-bit display range. The effectiveness and robustness of the proposed method are analyzed using the infrared images obtained from different operating conditions. Compared with other well-established methods, our method shows a significant performance in terms of dynamic range compression, while enhancing the details and avoiding the common artifacts, such as halo, gradient reversal, hazy or saturation.     

一种基于图像局部信息的红外图像动态范围压缩算法

红外焦平面探测器输出的信号通常为14bit数字图像,要在常用的显示器上显示必须将14bit的图像压缩到8bit,压缩算法直接影响到了图像的细节和对比度。提出了一种基于图像局部信息的红外图像动态范围压缩算法,通过高斯滤波器将原始红外图像分解为基图像和细节图像,并统计原始图像每个像素的局部方差,然后根据每个像素的局部方差计算细节图像的自动增益函数,最后,将基图像进行平台直方图均衡化后与细节图像合成得到压缩后的图像。通过对多种场景的红外图像进行仿真验证,表明该算法能较好地增强图像的细节。     

���ö�Ŀ������Ż��ƶ�ICF�Ȱ�״̬�ľ���ֲ�

提出了一种以多目标参数优化确定热斑的温度和密度径向分布的方法。用热斑中心位置和燃料界面位置对应的电子温度、靶剩余烧蚀层峰值密度、剩余烧蚀层质量与初始烧蚀层质量的比值以及燃料与烧蚀层分界面位置构成五维变量空间参数空间的每个点描述一组温度和密度分布。将实验测量的X射线图像的归一化强度分布与理论模型计算的强度分布的方差作为两个目标函数;另一个目标函数是实验测量的热斑的平均温度与理论模型计算的平均温度的方差。通过多目标遗传算法搜索五维参数空间获得最优参数,从而获得最优的温度和密度分布。对KB显微镜配合X射线胶片测量的实验结果进行了计算,给出了热斑的最佳温度和密度的径向分布。由测试算例发现,温度分布对目标函数的依赖较强。     

基于改进提升小波变换SPIHT的图像压缩算法

通过对提升小波变换的SPIHT算法进行改进和优化,提出了一种适用于无线多媒体传感器网络(WMSNs)的简单、高效、节能的有损图像压缩算法;该算法采用只包含加法和移位操作的整数小波提升算法,使得小波分解的计算量减半,大大提高了变换速度;采用量化截断的预处理技术,省去大量不重要高频系数的量化编码,解决了提升变换后SPIHT算法编码效率低的问题;去除了最外层高频系数的分解和编码,有效地减少了变换和编码的能耗;理论分析和仿真结果均表明,在保证一定重建图像质量的前提下,该算法大大降低了图像压缩能耗,提高了算法的压缩效率和执行效率,非常适合于资源受限的WMSNs中的图像压缩。     

钒的高压声速测量

采用反向碰撞方法进行了钒冲击实验,利用激光干涉测速技术对V/LiF窗口界面粒子速度剖面进行测量.通过对粒子速度剖面的分析获得了32—88 GPa压力范围内钒的高压声速.实验获得的声速-冲击压力关系在约60 GPa存在间断,表明钒发生了冲击相变.相变压力与静高压实验结果及第一性原理计算结果基本一致.     

水中受激布里渊散射脉冲的反常压缩

受激布里渊散射(SBS)具有脉冲压缩的特性,受激布里渊散射的脉冲宽度随着抽运能量的增大而变小,在水中可以达到几百皮秒的量级.本文在实验上观察到一种受激布里渊散射的脉冲宽度随抽运能量增大而变大的现象,这里称之为反常压缩.SBS的脉冲反常压缩和脉冲压缩与抽运光的强弱会聚情况有关.利用数值模拟,模拟了强弱会聚情况下抽运光在水中的传输规律,强弱会聚情况的抽运光对受激布里渊散射形成的有效增益长度不同:抽运光强会聚时有效增益长度短,形成SBS脉冲宽度的反常压缩;弱会聚时有效增益长度长,也就是正常的SBS脉冲压缩.     

Pulse compression effect based on stimulated Brillouin scattering light storage in an optical fiber

The pulse compression effect in SBS light storage is numerically investigated. We demonstrate theoretically that the compressed width of retrieved data-pulses is not only related with temporal profile of data-pulse, but also spectrum and temple profile of control-pulse. The data-pulses with steep rising edge can be compressed after they are retrieved. The optimum compression effect takes place when a 2-ns-long exponential data-pulse interacts with a 1.5-ns-long chirped Gaussian control-pulse, where the data-pulse width is compressed to 1.73-ns-long and the readout efficiency is the biggest. A 2-ns-long rectangular data-pulse is also compressed to 1.73-ns-long when it encounters to a 1.5-ns-long rectangular control-pulse, but the readout efficiency isn’t maximum value. The results are significant for increasing storage capacity and variable bits all-optical buffering.     

Omega phase of zirconium: Formation under shock wave compressin and stability at atmospheric pressure

Abstract

The structure of Zr after shock compression in the 8–32 GPa range at initial tempertures 290 K and 90 K has been investigated by X-ray diffraction and transmission electron microscopy. ω-phase fraction vs. peak pressure and crystallographic relationship between α- and ω-phases have been obtained. A dilatometric study of Zr samples containing ω-phase has been performed.